Warning
CyprusNet is not responsible or liable for any scams, frauds, misleading job offerings or false resume information within Cyprus Jobs free service. We strongly recommend that users never reveal private information such as credit cards, bank accounts, insurance numbers, passports, ID numbers or give away any money and so forth.
If you've been targeted by a job scam, report to: Cyprus Crime Combating Department
Theodoros Chatzidimitriou is looking for a Engineering & Architecture job in Nicosia;Larnaca, Cyprus.
Candidate Info
Name
Theodoros Chatzidimitriou
Gender
Male
Marital Status:
Single
Children:
No children
Country Of Origin:
GREECE
Last Updated:
30/01/2008
Residence / Contact Details
Address
25 Griva Digeni Av, Nicosia, CYPRUS
Professional Experience
January 2007 – today Baldor UK Ltd.
Full-time permanent employment as a power electronic development engineer. Responsible for the testing, and tuning of PCB Boards, parts of Servo Motor Drivers. Developing engineering, managerial, and communicational skills when dealing with; thermal tests, fault finding, PCB modifications and improvements in SMPS, Switch-Mode DC – AC Inverters, and hardware protection.
Working in an industrial environment with professionals, I had the opportunity to be involved and observe the process of power electronic applications progress from the design phase to production. This prospect gives me the chance to develop my problem solving and flexible thinking skills were in combination with a well working under pressure performance all the given tasks were accomplished successfully.
March 2006 – January 2007 Baldor UK Ltd.
Full-time contractor as an assistant engineer in power electronic applications. Responsible for the testing of PCB Boards, parts of Servo Motor Drivers. Developing engineering, managerial, and communicational skills when dealing with PCB modifications, circuit debugging, and testing.
July 2002- Feb 2004 Emmanuel K. Salem E.S.C.O. Technical
Full-time employment as a technician, responsible for the maintenance and minor construction works on the “Olympic Airways Cargo” building and Electromechanical Facilities within the National Airport of Greece “El.Venizelos”. Developed my engineering, managerial, and communicational skills when operating and maintain, BMS (Building Management Systems) software, Fire Detection Systems, Security Systems, HVAC, Generators and Electrical Substations within a working team. Actively participate in the organisation, reconstruction and maintenance of a fire detection network. My responsibilities primarily relied upon the use of my problem solving and flexible thinking skills; good under pressure performance, and daily transactions with staff at different levels was also required.
Aug 1999-Aug 2003
“ICHORAMA the Sound and Light Specialists”, Athens, Greece
Part-time employment as a sound support technician. Organising and installing sound and light support systems in live concerts, and social gatherings. Developed my interpersonal skills, how to conduct a market research as well as how to negotiate arrangements with customers.
Full-time permanent employment as a power electronic development engineer. Responsible for the testing, and tuning of PCB Boards, parts of Servo Motor Drivers. Developing engineering, managerial, and communicational skills when dealing with; thermal tests, fault finding, PCB modifications and improvements in SMPS, Switch-Mode DC – AC Inverters, and hardware protection.
Working in an industrial environment with professionals, I had the opportunity to be involved and observe the process of power electronic applications progress from the design phase to production. This prospect gives me the chance to develop my problem solving and flexible thinking skills were in combination with a well working under pressure performance all the given tasks were accomplished successfully.
March 2006 – January 2007 Baldor UK Ltd.
Full-time contractor as an assistant engineer in power electronic applications. Responsible for the testing of PCB Boards, parts of Servo Motor Drivers. Developing engineering, managerial, and communicational skills when dealing with PCB modifications, circuit debugging, and testing.
July 2002- Feb 2004 Emmanuel K. Salem E.S.C.O. Technical
Full-time employment as a technician, responsible for the maintenance and minor construction works on the “Olympic Airways Cargo” building and Electromechanical Facilities within the National Airport of Greece “El.Venizelos”. Developed my engineering, managerial, and communicational skills when operating and maintain, BMS (Building Management Systems) software, Fire Detection Systems, Security Systems, HVAC, Generators and Electrical Substations within a working team. Actively participate in the organisation, reconstruction and maintenance of a fire detection network. My responsibilities primarily relied upon the use of my problem solving and flexible thinking skills; good under pressure performance, and daily transactions with staff at different levels was also required.
Aug 1999-Aug 2003
“ICHORAMA the Sound and Light Specialists”, Athens, Greece
Part-time employment as a sound support technician. Organising and installing sound and light support systems in live concerts, and social gatherings. Developed my interpersonal skills, how to conduct a market research as well as how to negotiate arrangements with customers.
Qualifications
Automation Engineer with acknowledge in advance technologies and electronics
Skills
IT Skills Microsoft Office (Word, Outlook, Excel, Power Point, Front Page, Access, Visio)
Advance IT Skills PLC Programming (Siemens), Embedded systems design (VHDL, VLSI), PCB design, web page Design/Architecture (Limited), μControllers (Limited), Matlab Simulink,, C++ (Limited)
Extras European Union passport holder – Clean European Driving License
Advance IT Skills PLC Programming (Siemens), Embedded systems design (VHDL, VLSI), PCB design, web page Design/Architecture (Limited), μControllers (Limited), Matlab Simulink,, C++ (Limited)
Extras European Union passport holder – Clean European Driving License
Languages
Greek (Native)
English (intermediate to Fluent)
English (intermediate to Fluent)
Education
2004 – 2005 University of West of England – Bristol Uk
MSc Advance Technologies in Electronics (Full Time)
Core Subjects: Intelligent and Adaptive Systems, VHDL, VLSI, Actuators and Control, Embedded Real-Time Systems, DSP structure, Communication networks and Protocols.
Dissertation: Modelling of a Gantry Manipulator Robotic Arm system
Applied my academic knowledge on a physical system in a more practical environment. My research was based on the physical dimensions of the system transformed into mathematic equations from which the model of the robotic arm was created, with the aid of Matlab software. The main objective was to detect the position deviation of the system during acceleration and deceleration.
1999 – 2004 Hellenic Republic, Technological Educational Institute (T.E.I) of Piraeus. School Of Technological Applications Department of Automation, Athens Greece
BEng Automation Engineering – (6.23/10, Good)
Awarded with the title of Automation Engineer
Core Subjects: Automation and Control Systems (I, II, III), Digital Systems, Electrical, Electronics, Automation Installation, Electronic Design Construction, Telecommunications, PLC Programming, Mechatronics, Hydraulics and Pneumatic, Robotics, Technology of CNC.
Dissertation: Control of Electric and Electronic Devices Through Internet.
Designed a printed circuit board (PCB) and high voltage peripheral circuits to support the use of a specific web-server microprocessor programmed based on HTML language. A web site was built and broadcasted on the www. The aim was to achieve a close loop control of low and high voltage devices through the web.
1996 – 1999 Technical – Vocational Lyceum of Agia Paraskevi – Athens Greece Department of Electronic Installation and Automation – Senior High School (17.2/20, Very Good)
Core Subjects: Automation, Electronics, and Electrical
MSc Advance Technologies in Electronics (Full Time)
Core Subjects: Intelligent and Adaptive Systems, VHDL, VLSI, Actuators and Control, Embedded Real-Time Systems, DSP structure, Communication networks and Protocols.
Dissertation: Modelling of a Gantry Manipulator Robotic Arm system
Applied my academic knowledge on a physical system in a more practical environment. My research was based on the physical dimensions of the system transformed into mathematic equations from which the model of the robotic arm was created, with the aid of Matlab software. The main objective was to detect the position deviation of the system during acceleration and deceleration.
1999 – 2004 Hellenic Republic, Technological Educational Institute (T.E.I) of Piraeus. School Of Technological Applications Department of Automation, Athens Greece
BEng Automation Engineering – (6.23/10, Good)
Awarded with the title of Automation Engineer
Core Subjects: Automation and Control Systems (I, II, III), Digital Systems, Electrical, Electronics, Automation Installation, Electronic Design Construction, Telecommunications, PLC Programming, Mechatronics, Hydraulics and Pneumatic, Robotics, Technology of CNC.
Dissertation: Control of Electric and Electronic Devices Through Internet.
Designed a printed circuit board (PCB) and high voltage peripheral circuits to support the use of a specific web-server microprocessor programmed based on HTML language. A web site was built and broadcasted on the www. The aim was to achieve a close loop control of low and high voltage devices through the web.
1996 – 1999 Technical – Vocational Lyceum of Agia Paraskevi – Athens Greece Department of Electronic Installation and Automation – Senior High School (17.2/20, Very Good)
Core Subjects: Automation, Electronics, and Electrical
Training
03 October 2007 Circuit Board & Layout Issues for EMC Compliance
A one-day course targeting at practising electronics and PCB design and give practical advice on how to design for EMC compliance from the start of a project. Module overview: The aim is to provide attendees with a background in the common techniques used to avoid EMC problems both at the component selection and layout stages, as well as provide tips on embedded software issues that can produce “unexpected” problems if not considered.
Organizer: Premier EDA Solutions Ltd.
Course Tutor: Martin O'Hara
6th & 7th February 2007 PCB Design Excellence Course
A two days training course involving, a better understanding of modern PCB Design and manufacturing.
Module overview: Introduction to PCB evolution in design and manufacturing, Standards for PCB design and manufacturing, component packing, Routing, postprocessing, soldering, testing and inspection, and environmental issues.
Organizer: Premier EDA Solutions Ltd.
Course Tutor: Alan Johnson
A one-day course targeting at practising electronics and PCB design and give practical advice on how to design for EMC compliance from the start of a project. Module overview: The aim is to provide attendees with a background in the common techniques used to avoid EMC problems both at the component selection and layout stages, as well as provide tips on embedded software issues that can produce “unexpected” problems if not considered.
Organizer: Premier EDA Solutions Ltd.
Course Tutor: Martin O'Hara
6th & 7th February 2007 PCB Design Excellence Course
A two days training course involving, a better understanding of modern PCB Design and manufacturing.
Module overview: Introduction to PCB evolution in design and manufacturing, Standards for PCB design and manufacturing, component packing, Routing, postprocessing, soldering, testing and inspection, and environmental issues.
Organizer: Premier EDA Solutions Ltd.
Course Tutor: Alan Johnson
Interests
Hobbies Remote Control and Static Models (Aircrafts, cars), Cinema, listen to Music, and watch Documentaries in Science and Nature.
Sports Winter Sports (Skiing, ice-skating, climbing), Basketball, Table tennis, Motor Sports
Sports Winter Sports (Skiing, ice-skating, climbing), Basketball, Table tennis, Motor Sports
References
Employment Dr Gerry Boast, Engineering Manager, Baldor UK Ltd, Mint Motion Centre, 6 Bristol Distribution Park, Hawkley Drive, Bristol, BS32 0BF, UK, Tel: +44(0)1454850000, Fax: +44(0)1454859001
Emmanuel K. Salem, STR. Nider 13 171-24 N. Smyrni – Athens Greece, Tel: +30-210-3565412, Fax: +30- 210-9314953, Email: Salem@mland.gr
Academic Dr. Tony Pipe
Deputy Director - Intelligent Autonomous Systems Laboratory
School of Electrical & Computer Engineering
Faculty of Computing, Engineering & Mathematical Sciences
University of the West of England, Bristol
Anthony.Pipe@uwe.ac.uk
Tel: +44 (0)117 3282818
Farid Dailami
Senior Lecturer
School of Electrical & Computer Engineering
Faculty of Computing, Engineering & Mathematical Sciences
University of the West of England, Bristol
Farid.Dailami@uwe.ac.uk
Tel: +44 (0)117 32 82861
Emmanuel K. Salem, STR. Nider 13 171-24 N. Smyrni – Athens Greece, Tel: +30-210-3565412, Fax: +30- 210-9314953, Email: Salem@mland.gr
Academic Dr. Tony Pipe
Deputy Director - Intelligent Autonomous Systems Laboratory
School of Electrical & Computer Engineering
Faculty of Computing, Engineering & Mathematical Sciences
University of the West of England, Bristol
Anthony.Pipe@uwe.ac.uk
Tel: +44 (0)117 3282818
Farid Dailami
Senior Lecturer
School of Electrical & Computer Engineering
Faculty of Computing, Engineering & Mathematical Sciences
University of the West of England, Bristol
Farid.Dailami@uwe.ac.uk
Tel: +44 (0)117 32 82861
