CyprusNet is not responsible or liable for any scams, frauds, misleading job offerings or false resume information within Cyprus Jobs free service. We strongly recommend that users never reveal private information such as credit cards, bank accounts, insurance numbers, passports, ID numbers or give away any money and so forth.
If you've been targeted by a job scam, report to: Cyprus Crime Combating Department
Mohammed Ashif is looking for a Engineering & Architecture job in Nicosia;Limassol;Larnaca;Paphos;Famagusta, Cyprus.
TECHNOLOGY SPECIALIST (Hardware Engineer) at INFOSYS. JUNE 2014 TO PRESENT
ROLE: Hardware design/testing
RESPONSIBILITIES
· Designing high density analog/mixed signal circuits with respect to various existing schematics and customer requirements.
· Analog low power design for medical products as per medical standards.
· Creating schematics capture and schematic review, net list, PCB footprints, BOM, library models.
· Responsible for debugging and testing of add-on card products.
· Prototype design, schematic capture and verification.
· Checking DRC, net list and designing critical routing, differential routing, clock signal routing, bus/single ended routing.
· Prepare technical documentation including product specifications, layout instructions, test procedures, etc.
· Collaborate with cross work teams and determining the solution impacting the core system and components.
· Delivering fabrication and assembly packages to meet different manufacturing methods.
· Implementing Design Rules Check (DRC).
· Completing certifications under working domains.
· Designing PCB layouts for high frequency operation designs.
· FMEA on various CISCO routers and switches, fault insertion, testing on live boards working > 1Gbps.
· Reverse Engineering on high speed boards like RAID controller, Cisco 2G, 3G routers and switches.
· Designing layouts to comply with IPC standards and component placement.
· Support for product compliance test.
· Board bring up, module/Integration Testing.
· Interacting with client on providing weekly status progress.
Hardware Testing at CISCO (Contract EMP ID: 424249)
Ø FMEA
· Fault unit testing with Hi SAFE+ on Cisco NCS 6000 chassis (Panini), ASR 9000 chassis.
· Working with various international engineering team and weekly reporting clients worldwide.
· FMEA on line/fabric cards, fault insertion, testing on live boards >1Gbps.
· Fault insertion Pull up, Pull down, Differential on 500 GHz and above.
· Bit level testing, loopback testing, sending/receiving packets, generating XR traffic on IXIA IP tester.
· Manual/JTAG programming for various chips FGPA, CAN, PON, Flash, Clock, etc,.
· Able to perform root cause analysis, risk/failure assessment to ensure products meet its reliabilities
· Carry out hardware & software verification activities
· Ownership of verification, test development and execution
· Hardware test diagnosis with Hi safe+ module.
· Create test reports with the good amount of data
· Conduct Failure Analysis in detail and work with Functional team members.
· Configuring IOS-XR, system kernel on UNIX terminal.
· Design validation test, In-circuit testing, system level testing, unit/component testing.
· Design, assemble test fixtures and execute test plans.
· Testing, calibration and troubleshooting of existing production hardware at local or remote locations.
· Performing circuit analysis on cards installed on chassis, documenting failure root causes and ensured stress testing.
EMBEDDED ENGINEER R&D at SFORGE LLP. JUNE 2012 TO SEPTEMBER 2013.
RESPONSIBILITIES
· Development of device drivers and real time applications utilizing 16/32 bit microcontrollers and microprocessors.
· Write programming codes, enhancing and modifying codes as per the client’s requirements.
· Enhancement and testing of hardware projects and debugging, troubleshooting the microcontrollers products.
· Designing dual, four layer PCB boards with respect to various schematic designs and customer requirements.
· Verification and analysis of finished design.
· Solve highly advanced hardware engineering problems (certification, power supplies, high speed interfaces, high speed memory and processor busses).
· Testing the board functionality at various levels of board bring up process.
· Designing PCB layouts for high frequency (beyond 200 MHz) operation designs.
· Designing layouts to comply with IPC standards.
· Interfacing communication protocols with main board and testing using analyzers.
· Mainly responsible in firmware development of ARM based microcontroller.
· Build, test and modify product prototypes using working models or theoretical models constructed with computer simulation.
· Test and verify hardware and support peripherals to ensure that they meet specifications and requirements, by recording and analyzing test data.
· Preparation of product design documents.
QUALITY ASSURANCE ENGINEER at AKIRA CONTROLS JUNE 2011 TO MAY 2012.
RESPONSIBILITIES
· Analyze the product functionality, design and authorize the product quality as per IPC standards.
· Preparation of low level design using PIC and Atmel based microcontrollers.
· Assemble and modify existing pieces of equipment to meet special needs.
· Trouble shooting and debugging the finished microcontroller products and reporting daily.
· Knowledge of International quality standards and implementing them.
· Ensure the products are assembled according to company standard legends and visual inspection.
· Testing the products using calibration instruments, jig test and ageing if required.
· Assembling PCB with professional soldering as per IPC standards.
· Carry out operational test and preparation of product quality inspection reports.
· Working with cross teams and determining the solution impacting the core system and components.
· Interacting with fabrication house on getting PCB manufactured.
· In charge of store and inventory maintenance.
· Provide training and support to other trainees as needed.
· Provide the final QA report of the design and the product.
· Support for product compliance test.
2013 MBA Bharathiar University (SDE), FIRST CLASS
(Information System Management) Bharathiar University.
2011 B.Tech Dr, M.G.R Educational & Research Institute, CPGA – 8.8
(Electronic and Communication Engineering)Dr. M.G.R University. (DISTINCTION WITH FIRST CLASS)
TRANINGS
• Embedded System Design.
• CCNA Certified.
• Network+ Certified.
• RF design, Cadence EDA, Professional soldering.
• Six Sigma.
SOFTWARES
Languages : C++, Proficient in C and Embedded C.
Packages : MS-Office, LABVIEW.
Operating System : Windows, Linux, Cisco IOS
Real Time OS : FreeRTOS, µC/II OS.
Technologies : Bluetooth, GSM, Ethernet, Zigbee, WIFI
EDA Tools : Cadence Orcad, Allegro 16.5, Altium Designer, NI design suite, Proteus, Mentor Graphics (PADS), Design Spark, Pspice, Hyper lynx
Compiler/IDE : CCS (PIC C), Eclipse IDE, KEIL IDE, IAR WORKBENCH.
Interfaces : SPI, I2C, UART, USB, PCIe, RAPID IO, R232, RS485, CAN, JTAG
Memory Devices : DDR3, FLASH, EEPROM, SDRAM.
Networking protocols: TCP-IP/ UDP, RIP, OSPF, EIGRP, VLAN, TFTP, TELNET, SSH
High speed : FPGA, CPLD, SWITCHES.
ELECTRONIC INSTRUMENTS
· Digital signal oscilloscope, IXIA IP performance tester, signal analyzer, logic analyzer, function generator, multimeter, JTAG, DC electronic load.
· Testing module: Hi Safe+module, Jig test, ATE.
OVERALL SKILLS
· Analog/ Digital design
· DFT, DFM, DFMEA
· RF design above 1 Gbps
· Ethernet/ Fast Ethernet
· Data acquisition
· IOT
· Low power design
· SMPS
· Power convertors
· Monitoring and control
· Design Verification
· Sensors and wireless communication
· Board bring up & testing
· In circuit test
· Functionality test
· Diagnosis
· Unit/system test
· Bare board test
· Calibration test
· TCP-IP
· Unix/Linux
· Networking L1/L2
· Networking protocols
MANAGEMENT SKILLS
·Quality Assurance Monitoring.
·Managed a team of 10 engineers.
·Six Sigma coordinator.
·KAIZEN
English - Fluent
French - Intemediate
Hindi - Fluent
Tamil - Mother tongue
2013 MBA Bharathiar University (SDE), FIRST CLASS
(Information System Management) Bharathiar University.
2011 B.Tech Dr, M.G.R Educational & Research Institute, CPGA – 8.8
(Electronic and Communication Engineering)Dr. M.G.R University. (DISTINCTION WITH FIRST CLASS)
• Embedded System Design.
• CCNA Certified.
• Network+ Certified.
• RF design, Cadence EDA, Professional soldering.
• Six Sigma.
Musics, New technologies, Trekking, Biking, outdoor games, social activity
